How To Remove Stuck Handlebar Quill Stem - Worst Case Scenario!

I have been asked several times how to remove a frozen quill stem. But none of the bikes I was working on had frozen stems. Or they were only a little bit stuck and were so easily removed that it wasn't worth making a video. Then I hit the jackpot with this bike. It was an old Schwinn I had sitting in my garage. They don't get any more stuck than this one! I started with penetrating oil. Then vinegar to dissolve the rust. Heat gun the expand the metal and break the bond. Hitting it with a hammer. I finally resorted to cutting it off.

Check out my video of removing a stuck stem with a cable puller winch:
   • Removing Seized Handlebar Stem Using ...  

I found a stem that was even worse!!! I ended up disolving it using drain cleaner:
   • Removing Seized Quill Stem With Drain...  

▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy

👍 And please give my video a thumbs up 👍

▶FACEBOOK.com/RJTheBikeGuy
  / rjthebikeguy  

▶TOOLS
http://www.rjthebikeguy.com/tools

▶SHIRTS
http://bit.ly/RJBikeGuyShirts

▶WEBPAGE
http://www.RJTheBikeGuy.com