Removing Seized Handlebar Stem Using Cable Puller Winch

I remove a stuck handlebar quill stem with a cable puller/winch/come-along. I wanted to remove the stem without damaging it so I can use it on another bike. I wanted to try a cable puller/hand winch to see if that would do it. Be careful if you try this. The stem could potentially release quickly and go flying. It this case it didn't. The cable puller is rated for 4000lb. The rope I used is rated for a 396lb safe working load. The chain was rated for well over 1000lb. If you try, this, do so at your own risk. I will probably do it again next time I get a frozen stem. I think the method is promising and can be improved on.

▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy

👍 And please give my video a thumbs up 👍

▶FACEBOOK.com/RJTheBikeGuy
  / rjthebikeguy  

▶TOOLS
http://www.rjthebikeguy.com/tools

▶SHIRTS
http://bit.ly/RJBikeGuyShirts

▶WEBPAGE
http://www.RJTheBikeGuy.com