How to Replace Rear Strut 2003-2008 Toyota Corolla

Buy Now!
New Strut & Spring Assembly from 1AAuto.com https://trq.video/ia-1ASTS00962

This video shows you how to install a rear strut on your 2003-2008 Toyota Corolla. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.

This repair was done on a 2008 Toyota Corolla S 1.8L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla

Tools you will need:
• Pry Bar https://trq.video/oPE-1AXAA00020
• 14mm Socket https://trq.video/obiP-1AXAA00015
• 19mm Socket
• 21mm Socket
• 1/2 Inch Impact Gun https://trq.video/oqq-1AXAA00252
• 3/8 Inch Impact Gun
• Socket Extensions https://trq.video/obiP-1AXAA00015
• Torque Wrench https://trq.video/oawN-1AXAA00044
• Brake Grease
• Gloves https://trq.video/oQU-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oXf-1AXAA00068
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Toyota Corolla 9th Generation 2003-2008:    • Toyota Corolla 9th Generation 2003-2008  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.