High Quality LED Flasher Using BC547 NPN Transistor | LED Flasher | Javier's DIY

High Quality LED Flasher Using BC547 NPN Transistor | LED Flasher | Javier's DIY

An LED flasher circuit is a circuit which flashes the LED- meaning turns it ON-OFF, ON-OFF, ON-OFF.

The BC547 is a NPN transistor meaning when power is applied to the base (control pin) it will flow from the collector to the emitter. Typically NPN transistors are used to “switch ground” on a device, meaning, they are placed after the load in a circuit.

Component's Needed:
🔴 2x BC547 NPN transistor
🔴 2x 10v 470uf capacitor
🔴 2x 10K ohm Resistor
🔴 Insulated wires
🔴 Copper wire .1mm
🔴 5x LED Blue lights
🔴 5x LED Red lights
🔴 4.2VDC input

Subscribe to my channel and click the bell button to be updated on my next video. Thank you for watching♥️Enjoy and have a great day.
👉   / javier'sdiy👈  


Related DIY videos:

DIY RC Car from Cardboard:
   • How to Make RC Car From Cardboard | J...  

DIY 12v Power Supply:
   • How to Make 12v Power Supply and Char...  

DIY 13000 mAh Powerbank:
   • How to Make a 13000 mAh Powerbank  

DIY Sander Disk from Old DVD/CD player:
   • How to Make a Mini Sander Disk from O...  

3 in 1 Power Supply:
   • How to Make a 3 in 1 Power Supply in ...  

DIY VU Meter:
   • How to Make a VU Meter Without an IC  

DIY Face shield:
   • How to Make DIY Face Shield  

DIY Tester:
   • How to Make Test Light at Home Simple...  

DIY Flashlight:
   • How to Make Emergency Light at Home |...  

DIY RC Car:
   • How to Make RC Car From Cardboard | J...  

DIY Generator:
   • How to Make Generator Using DC Motor  

DIY Air Cooler:
   • How to Make a Powerful Air Cooler at ...  

DIY Water Pump:
   • How to Make Powerful Water Pump at Home  

DIY Air Pump:
   • How to Make an Air Pump | Javier's DIY  


#BC547LEDFlasher
#LEDFLASHER
#HighQualityLEDFlasher