Replace rear brake rotors on a 9th generation Honda Civic (2012 - 2015)

I bought this used 2014 Honda Civic 1.8 EX with 130,000 miles.
The rotors had a lot wear with grooves.
I noticed the calipers a little rusted so I gave it a very good clean.
I also applied PB blaster on the parking brake spring.

Front bracket bolts: 80 ft-lbs
Front sliding pin caliper bolts: 25 ft-lbs
Rear bracket bolts: 55 ft-lbs
Rear sliding pins: 17 ft-lbs

Check these other Civic videos:
Change rear brake pads:    • Replace rear brake pads on a 9th gene...  
Change front brake pads:    • Replace Front Brake Pads on a 9th gen...  
Replace brake fluid:    • Replace brake fluid on a 9th generati...  
Transmission fluid:    • CVT Transmission Fluid Change (ATF) o...  
Coolant Drain and Fill:    • Engine Coolant Drain and Fill on a 9t...  
Oil and Filter Change:    • Oil and Filter Change on a 9th genera...  
Replace PCV valve:    • Replace PCV valve on a 9th generation...  
Clean MAF sensor:    • Clean Mass Air Flow Sensor (MAF) on a...  
Clean MAP sensor:    • Clean Manifold Absolute Pressure sens...  
Replace cracked air intake hose:    • Replace Cracked Air Intake Hose on a ...  
Clean throttle body:    • Clean Throttle Body on a 9th generati...  
ATF plug popping out:    • Automatic Transmission Plug keeps com...  
Engine Breather Cover Oil Leak:    • Engine Breather Plate Oil Leak on a 9...  
VTEC Solenoid Oil Leak:    • VTEC Solenoid Oil Leak on a 9th gener...