etrailer | Breaking Down the Custom Third Brake Light Camera for Aftermarket Monitor

Click for more info and reviews of this GCH Automotive Backup Camera,Third Brake Light:
https://www.etrailer.com/Accessories-...
https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-GCH-...
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this custom third brake light cargo camera for an aftermarket monitor on your Ram trucks. Now, this is a custom fit part. It is designed to fit the 2019 and newer Ram 1500, 2500, 3500, 4500, and 5500 trucks. And on a custom fit part like this, I always like to recommend for you to go to our website, and use the fit guide, put in your year and model vehicle and it'll show if this'll work for your application. Now this kit will include everything laid out here on the table.

I'm holding the third brake light bezel that has the camera in it. There it comes with two different gaskets they're just different thicknesses. Comes with a nine foot long camera harness and the power harness. Now this custom nuzzle with the camera will mount behind your factory third brake light so that you can see into your truck bed. It is designed to work with an aftermarket monitor, which we do sell separately on our website.

It does assist in connecting a fifth wheel or gooseneck trailer, and it is compatible with an RCA composite input. It'll only function while in reverse. And the camera right here, will manually adjust 360 degrees for a perfect angle into your truck bed. Gives you 150 degree viewing angle. The diameter and the camera itself is only about one inch.

It does offer rear assist marker lights, which are generated by the camera, which will show the distance from other objects. And this camera has zero lux night vision. So it produces a quality picture in complete darkness with the IR transmitters. It is a waterproof aluminum camera, resists dust and corrosion. It is IP69 rated to protect against dust at a close range, high pressure spray.

And it is a very simple installation. There's no drilling required. And the specs for this camera's voltage should be 12 volts to 24 volts DC. But that should do it for the review on the custom third brake light cargo camera for an aftermarket monitor on the Ram trucks..