How to Replace Front Sway Bar Link 2005-2010 Chevrolet Cobalt

Buy Now!
New Sway Bar Link from 1AAuto.com http://1aau.to/if/1ASSL00077

This video shows you how to install front sway bar links on your 2005-2010 Chevrolet Cobalt. Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle.

This process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt

Tools you will need:
• 17mm Wrench http://1aau.to/occ/1AXAA00010
• 18mm Socket http://1aau.to/odr/1AXAA00043
• 19mm Socket http://1aau.to/odr/1AXAA00043
• Large Locking Pliers
• Ratchet http://1aau.to/oi4/1AXAA00016
• Socket Extensions http://1aau.to/oh9/1AXAA00015
• Torque Wrench http://1aau.to/oe8/1AXAA00044

Subscribe:    / @trq  

Check out our playlist:
Chevy Cobalt 2005-2010 1st Generation:    • Chevy Cobalt 2005-2010 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.