How to Replace Rear Shock Absorber 2005-2010 Chevrolet Cobalt

Buy Now!
New Shock Absorber from 1AAuto.com http://1aau.to/ib/1ASHA00187
New Shock Absorber Set from 1AAuto.com http://1aau.to/ib/1ASSP00654

This video shows you how to install shock absorbers on your 2005-2010 Chevrolet Cobalt. Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly.

This repair was done on a 2007 Chevrolet Cobalt LT 2.2L Coupe 2-Door FWD and the process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt

Tools you will need:
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 1/2 Inch Impact Gun http://1aau.to/oaZ/1AXAA00252
• Torque Wrench http://1aau.to/oiS/1AXAA00044
• Liquid Thread Locker
• Wire Brush http://1aau.to/obd/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Chevy Cobalt 2005-2010 1st Generation:    • Chevy Cobalt 2005-2010 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.