How to Replace Passenger's Side Lower Tie Rod 2008-2010 Ford F-250

Buy Now!
New Tie Rod from 1AAuto.com http://1aau.to/ia/1ASTE00464

This video shows you how to install new TRQ outer tie rods on your 2008-2010 Ford F-250. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.

This process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty

Tools you will need:
• 19mm Socket http://1aau.to/o4H/1AXAA00043
• 21mm Socket http://1aau.to/o4H/1AXAA00043
• Straight Cutters
• Torque Wrench http://1aau.to/oaoU/1AXAA00044
• Anti-Seize Grease
• Chisel http://1aau.to/ojQ/1AXAA00055
• Hammer http://1aau.to/oMB/1AXAA00091

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.