How to Replace Upper Ball Joint 2008-2010 Ford F-250

Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ia/1ASBJ00025

This video shows you how to install an upper ball joint on your 2008-2010 Ford F-250. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.

This process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty

Tools you will need:
• Pocket Screwdriver
• Pry Bar http://1aau.to/oJX/1AXAA00020
• 21mm Socket http://1aau.to/o4B/1AXAA00043
• 32mm Socket http://1aau.to/obY/1AAST00003
• 34mm Socket http://1aau.to/oQ/1AAST00004
• 8mm Socket http://1aau.to/oaQd/1AXAA00017
• Ball Joint Press
• Cutoff Wheel http://1aau.to/oad/1AXAA00254
• Snap Ring Pliers
• Straight Cutters
• 1/2 Inch Impact Gun http://1aau.to/oor/1AXAA00252
• Air Chisel http://1aau.to/oba/1AXAA00270
• T27 Torx Socket
• Ratchet http://1aau.to/obis/1AXAA00016
• Socket Extensions http://1aau.to/oa7u/1AXAA00015
• Torque Wrench http://1aau.to/oaoM/1AXAA00044
• Anti-Seize Grease
• Copper Anti-Seize
• Gloves http://1aau.to/oC2/1AXSS00048
• Rust Penetrant
• Safety Glasses http://1aau.to/owJ/1AXAA00343
• sanding disc
• Floor Jack http://1aau.to/oR6/1AXAA00068
• Hammer http://1aau.to/oMw/1AXAA00091
• Razor Blade / Gasket Scraper http://1aau.to/ohj/1AXAA00280
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.