How To Replace Lower Control Arm 1997-04 Dodge Dakota

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00552

Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 1997-2004 Dodge Dakota.

• Check here for more videos on the 1997-2004 Dodge Dakota:    • Плейлист  

This process should be similar on the following vehicles:
1997 Dodge Dakota
1998 Dodge Dakota
1999 Dodge Dakota
2000 Dodge Dakota
2001 Dodge Dakota
2002 Dodge Dakota
2003 Dodge Dakota
2004 Dodge Dakota

Tools you will need:
• Pry Bar http://1aau.to/odc/1AXAA00020
• 15mm Wrench http://1aau.to/odi/1AXAA00010
• 10mm Socket http://1aau.to/ojL/1AXAA00017
• 17mm Socket http://1aau.to/omI/1AXAA00015
• 18mm Socket http://1aau.to/ofk/1AXAA00043
• 21mm Socket http://1aau.to/ofk/1AXAA00043
• 23mm Socket
• 25mm Socket
• Brake Caliper Hanger http://1aau.to/oU/1AXAA00084
• Locking Pliers http://1aau.to/oao/1AXAA00139
• Side Cutters
• 1/2 Inch Breaker Bar http://1aau.to/oaM/1AXAA00078
• Ratchet http://1aau.to/onM/1AXAA00016
• Torque Wrench http://1aau.to/ohp/1AXAA00044
• Liquid Thread Locker
• 7mm Hex Socket
• Floor Jack http://1aau.to/odz/1AXAA00068
• Hammer http://1aau.to/odj/1AXAA00091
• Rubber Mallet http://1aau.to/oY/1AXAA00413
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Dodge Dakota 1997-2004 2nd Generation:    • Dodge Dakota 1997-2004 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.