DIY Logitech Pedals USB Adapter (No Soldering!)

I'm going to show you how to build a simple USB adapter for the Logitech Driving Force pedals. These pedals come with most Logitech wheels including the G923, G29, G920, G27, and G25. This adapter only takes about 15 minutes to put together, and requires absolutely no soldering.

🔧 Parts:
* DB9 Female to Screw Terminal Adapter: https://amzn.to/3as4wFu
* Solid-Core Wire (22 AWG): https://amzn.to/3z4cGy2
* Arduino Leonardo: https://amzn.to/3LQSEde or https://amzn.to/3za8BIu
* Needle-Nose Pliers: https://amzn.to/3LUokOT

The above are Amazon Affiliate links. As an Amazon Affiliate I earn from qualifying purchases.

💾 Downloads:
* Sim Racing Library: https://github.com/dmadison/Sim-Racin...
* Joystick Library: https://github.com/MHeironimus/Arduin...
* Arduino IDE: https://www.arduino.cc/en/software

📝 Article: https://www.partsnotincluded.com/how-...

If you want something more permanent, I've designed some open source circuit board "shields" that attach to an Arduino Pro Micro. These come with a 3D-printable case and custom boards files so that the adapter shows up as "Sim Racing Pedals" over USB. For more info, watch the overview video:    • Sim Racing Shields for Arduino  

Chapters:
0:00 Intro
0:13 Supplies
0:27 Connector Wiring
2:03 Arduino Wiring
2:33 Download Software
2:55 Install Libraries
3:12 Upload Firmware
3:57 Testing
4:53 Outro

"Industrious Ferret" by Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/b...