DIY Logitech Shifter USB Adapter (No Soldering!)

I'm going to show you how to build a simple USB adapter for the Logitech Driving Force Shifter. This only takes about 15 minutes to put together, and requires absolutely no soldering.

🔧 Parts:
* DB9 Male to Screw Terminal Adapter: https://amzn.to/3lMkH2X
* Solid-Core Wire (22 AWG): https://amzn.to/3z4cGy2
* Arduino Leonardo: https://amzn.to/3LQSEde or https://amzn.to/3za8BIu
* Needle-Nose Pliers: https://amzn.to/3LUokOT

The above are Amazon Affiliate links. As an Amazon Affiliate I earn from qualifying purchases.

💾 Downloads:
* Sim Racing Library: https://github.com/dmadison/Sim-Racin...
* Joystick Library: https://github.com/MHeironimus/Arduin...
* Arduino IDE: https://www.arduino.cc/en/software

📝 Article: https://www.partsnotincluded.com/how-...

If you want something more permanent, I've designed some open source circuit board "shields" that attach to an Arduino Pro Micro. These come with a 3D-printable case and custom boards files so that the adapter shows up as a "Sim Racing Shifter" over USB. For more info, watch the overview video:    • Sim Racing Shields for Arduino  

Chapters:
0:00 Intro
0:13 Supplies
0:27 Connector Wiring
2:19 Arduino Wiring
2:59 Download Software
3:20 Install Libraries
3:38 Upload Firmware
4:25 Testing
5:13 Outro

"Industrious Ferret" by Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/b...