How to Replace Rear Coil Spring 2005-2010 Chevrolet Cobalt

Buy Now!
New Coil Spring Set from 1AAuto.com http://1aau.to/ia/MGSRS00025

This video shows you how to install new coil springs in your 2005-2010 Chevrolet Cobalt. Worn coil springs cause a bouncy, unstable, and unsafe ride. If the ride in your vehicle feels like a trampoline, it's time for new springs!

This process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt

Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 10mm Socket http://1aau.to/oa/1AXAA00017
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Drill
• Brake Grease
• Liquid Thread Locker
• Jack Stands http://1aau.to/oa/1AXAA00065
• Wire Brush http://1aau.to/oa/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.