Rigging Shrouds Part 4 - HMS Sphinx (Vanguard Models) - Model Boats

I have created 4 videos showing the method I am currently using to rig the shroud lines on my HMS Sphinx model boat. This is the final video in the series. My build log for this model can be found at:

https://modelshipworld.com/topic/3021...

This is the final video in this sequence. A 30cm length of 0.25mm natural thread is used for the lanyard.

The lanyard thread is run through the different deadeye holes in sequence. Once the initial lanyard rigging is complete some tension applied to the shroud the and the
slack in the middle lanyard is taken up. This is followed by taking the slack up in the left-hand side lanyard. After a couple of goes the new deadeye is sitting at approximately the same level of the other ones and the shroud and lanyard are nicely tensioned.