How to Replace Inner Tie Rods 2007-17 Ford Expedition

Buy Now!
New Tie Rod Set from 1AAuto.com http://1aau.to/ia/1ASFK03742
New Tie Rod from 1AAuto.com http://1aau.to/ia/1ASTE00732

The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms. This video shows you how to replace the inner tie rods on your 2007-2017 Ford Expedition.

• Check here for more videos on the 2007-17 Ford Expedition:    • Ford Expedition 3rd Generation 2007-17  

This repair was done on a 2010 Ford Expedition XLT 5.4L Sport Utility 4-Door Automatic and the process should be similar on the following vehicles:
2007 Ford Expedition
2008 Ford Expedition
2009 Ford Expedition
2010 Ford Expedition
2011 Ford Expedition
2012 Ford Expedition
2013 Ford Expedition
2014 Ford Expedition
2015 Ford Expedition
2016 Ford Expedition
2017 Ford Expedition

Tools you will need:
• Pry Bar http://1aau.to/oeH/1AXAA00020
• 21mm Socket
• Inner Tie Rod Removal Tool http://1aau.to/ow/1AXAA00438
• Channel-Lock Pliers http://1aau.to/oaE/1AXAA00139
• Hose Clamp Pliers http://1aau.to/oR/1AXAA00076
• Large Locking Pliers
• Needle nose pliers http://1aau.to/ocy/1AXAA00051
• Needle nose pliers http://1aau.to/ocy/1AXAA00052
• Straight Cutters
• 1/2 Inch Impact Gun http://1aau.to/obg/1AXAA00252
• Ratchet http://1aau.to/orY/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/oqF/1AXAA00015
• Torque Wrench http://1aau.to/oj6/1AXAA00044
• Copper Anti-Seize
• Liquid Thread Locker
• Paper Towels http://1aau.to/ocp/1AXSS00035
• Wire Ties
• Floor Jack http://1aau.to/oe2/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oeH/1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Ford Expedition 3rd Generation 2007-17:    • Ford Expedition 3rd Generation 2007-17  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.