Part 2 - Super Easy 3D Printed Arduino CNC Drawing Machine - The Software | GRBL | Inkscape Plotter

Learn how to upload and configure GRBL to your Arduino CNC machine. I'll also help you test it and then show you how to create your own artwork. 👇 More info below 👇

Part One for this project (which guides you through the 3D printing and assembly) can be found here:    • Super Easy 3D Printed Arduino CNC Dra...  

Support future projects, see DIY Machines' Amazon Wish List: https://www.amazon.co.uk/hz/wishlist/...

List of items used in this project and where to find them:

■ 8 x15 x 45mm Linear Bearing (x2): https://geni.us/LinearBearing45mm
■ 8 x 15 x 25mm Linear Bearing (x1): https://geni.us/LinearBearing25mm
■ 12v Nema 17 stepper motors (x2): https://geni.us/StepperMotor
■ GT2 Timing belt and pulleys: https://geni.us/TimingBelt5m
■ Micro servo (x1): https://geni.us/MicroServo
■ Elegoo Arduino Uno (x1): https://geni.us/ArduinoUno
■ Nuts, bolts and screws (See list below): https://geni.us/NutsAndBolts
■ Stepper drivers - TMC2208 (x2): https://geni.us/TMC2208
■ Contact switch (x2): https://geni.us/ContactSwitch
■ Arduino CNC Shield (x1): https://geni.us/ArduinoCNCShield
■ 30mm 5V Fan (x1): https://geni.us/30mm5vFan
■ 8mm Chromed Steel Rod (35cm x2 & 5.5cm x1): https://geni.us/8mmChromedSteelRod
■ 30cm long linear rail with block - MGN12H (x1): https://geni.us/LinearRail300mm
■ Electrical wire: https://geni.us/22AWGWire
■ 12v power supply - 2A or greater (x1): https://geni.us/12VPowerSupply2A
■ Barrel Connector - Female (x1): https://geni.us/FemalePowerBarrel
■ 6mm Idler Wheel - 3mm Bore (1): https://geni.us/6mmIdlerWheel3mmBore
■ Wooden panel to mount project at least 36x42cm (I used an Ikea ‘LÄMPLIG’ chopping board)
■ Sharpie Pens: https://geni.us/Sharpie
■ 3D Printer Filament: https://geni.us/3DJake

(As an Amazon Associate I earn from qualifying purchases. This helps to pay for the next project.)

Nuts, bolts and screws needed:
■ M5 x 25mm (x2)
■ M3 x 18 (x3)
■ M3 x 12 (x2)
■ M3 x10 (x3)
■ M3 x 6 (X14)
■ M3 nuts (x9)
■ M5 nut (x1)
■ Short wood screws (x8)

I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymac...

Prusa support my channel when you use that link at no cost to yourself. :)

These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: https://geni.us/Bosch-Screwdriver

==========

The code, wiring diagrams, 3D printable parts etc can be downloaded for free from here:
https://www.diymachines.co.uk/arduino...

The drawings I created for use with my machine:
https://geni.us/EtsyCNCDrawingFiles

Inkscape 0.48.5 for Windows:
https://inkscape.org/release/inkscape...

==========

SAY THANKS:

Provide continual and dependable support through Patreon:
Support us on Patreon:   / diymachines  

Buy me a coffee to say thanks: https://ko-fi.com/diymachines

SUBSCRIBE:
■    / @diymachines  

DISCORD server:   / discord  
INSTAGRAM: https://www.instagram.com/diy_machine...
FACEBOOK: https://www.facebook.com/diymachines/...
PATREON:   / diymachines  

==========
List of camera and lighting equipment I use:

Sony A7 III: https://geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : https://geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: https://geni.us/AputureAmaranHR672C
Aputure MC: https://geni.us/FAPGL
RØDE VideoMic Pro+: https://geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: https://geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: https://geni.us/PhilipsHue-LightStrip



Disclaimer:
This video is shared for demonstration purposes only.