Making barrel rifling using steel tubes

Making barrel rifling using steel tubes

Fund my projects: https://buymeacoffee.com/pcpairgunsch...

In this video I will show barrel rifling for a 5.5mm, or .22 cal tube using an allen key. the same allen key method can be used for other calibers too, just make sure that the rifling button is 0.1mm-0.2mm bigger in diameter than the barrel inner (bore) diameter. In my case I used a 5.62mm button for a 5.48mm tube, and it worked quite well as you can see in the video. This barrel will be used for gas propelled PCPs.

Note: This video is for educational and entertainment purposes only. Do not emulate or copy anything you see in this video.

Allen keys: https://s.click.aliexpress.com/e/_Dns...
12mm OD tube (ID: 5.5mm, 4.5mm, 6mm, 9mm): https://s.click.aliexpress.com/e/_DEn...
16mm OD tube (more options +7.62, 6.35, etc): https://s.click.aliexpress.com/e/_Dlo...

LATHE used in the video:
MINI Lathe 7x16 800W (Europe and USA link): https://s.click.aliexpress.com/e/_DlY...
Asia link: https://s.click.aliexpress.com/e/_Dlt...