Wire Wrap Pendant Tutorial 'Bonnie'.

Hello and welcome to my latest tutorial.

To make this pendant you will need -
• 21 awg square wire or round 0.8mm wire, 4 x 8.5" (22cm)
• 0.315mm weaving wire (28g) 150cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• cabochon, mine is 30mm by 17mm (you can use a similar size, just remember to adjust wire length and weave repeats accordingly)

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)

My Etsy shop - https://www.etsy.com/uk/shop/KellyJon...
Facebook -   / kellyjjewellery  
IG - kellyjjewellery

Thanks for watching x

Music is free from youtube;
Invisible Beauty - Aakask Gandhi


©2023 Kelly Jones Jewellery All Rights Reserved

Please do not copy or share this content!
This content is created for me (Kelly Jones Jewellery) as a means to promote my tutorials.
Do not share or reproduce this content in any format.
Thank you!