Stealth Hitches | Properly Installing the Rack Receiver & Ball Mount Accessories

Stealth Hitches Install Specialist, Chris Long, walks you through the steps to properly insert the Rack Receiver or Ball Mount into the stainless steel Latch Block. Whether it's your first time or you just need a quick refresher, this guide will help you make sure your Stealth Hitches accessories are securely attached.

Inserting the Accessories
1 - Remove the Rubber Plug from the stainless steel Latch Block.
2 - Check the Handle Position: Ensure the handle is in the spring-loaded position before installing the insertion pin. If needed, turn the handle clockwise.
3 - Select the Proper Hitch Accessory: The Rack Receiver has been designed and tested for use with hitch mounted accessories. For towing applications, be sure to use the Ball Mount and ensure that the additional required towing components (safety chain hooks & proper wiring harness/controller kit) are installed on your vehicle.
4 - Insert the Accessory: Position your hand under the component and gently insert the accessory into the opening of the Latch Block. Press firmly upward until you feel and hear the positive latch of the handle.
5 - Latch the Accessory: It is not necessary to touch the handle during this step. Simply, press firmly upward until you feel and hear the positive latch of the handle. When the handle releases, your accessory is latched.
6 - Secure the Lock: On the side of the Latch Block, remove the cover on the key button and press the lock button fully in until it clicks and stays seated. Cover the lock with the rubber cover.

Important: Using the right hitch accessory is crucial for your safety and the safety of others. Using the Rack Receiver for towing can cause serious injury. Always use the Stealth Hitches Ball Mount Accessory when towing a trailer. Failure to properly insert and lock the accessory could result in accidental release.

Removing the Rack Receiver / Ball Mount:    • Stealth Hitches | Removing the Rack R...  

To find the right hitch kit for your vehicle, check out our Rack-To-Tow Conversion kits, browse additional Stealth Hitches Accessories, or grab replacement parts, visit: https://stealthhitches.com/

Have any questions? Call us at: 678-714-3592 (M-F, 8am-5pm ET)

-----------
Chapters:
0:00 - Introduction
0:03 - Removing the Rubber Plug
0:07 - Checking the Handle Position
0:11- Selecting the Proper Hitch Accessory
0:28 - Latching the Accessory
0:43 - Securing the Lock
-----------

#StealthHitches #TheHitchMadeToBeHidden