How to Replace Front Ball Joint 2003-2008 Toyota Corolla

Buy Now!
New Ball Joint from 1AAuto.com https://trq.video/ia-1ASBJ00201
New Ball Joint Set from 1AAuto.com https://trq.video/ia-1ASFK01543

This video shows you how to install a front ball joint on your 2003-2008 Toyota Corolla. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.

This repair was done on a 2008 Toyota Corolla S 1.8L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla

Tools you will need:
• 17mm Socket https://trq.video/obiR-1AXAA00015
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 30mm 12-Point Socket https://trq.video/o7-1AAST00002
• Blowtorch
• Pickle Fork
• 1/2 Inch Impact Gun https://trq.video/oqs-1AXAA00252
• 3/8 Inch Impact Gun
• Socket Extensions https://trq.video/obiR-1AXAA00015
• Swivel
• Torque Wrench https://trq.video/oawQ-1AXAA00044
• Anti-Seize Grease
• Gloves https://trq.video/oQY-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oXh-1AXAA00068
• Hammer
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Toyota Corolla 9th Generation 2003-2008:    • Toyota Corolla 9th Generation 2003-2008  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.