How to install a helical cutter head into a DeWalt DW733 Planer

This video shows you all the steps to install the Findbuytool spiral cutterhead on the DW733 planer. The upgrade process is not difficult at all.

This Findbuytool well-manufactured helical cutter head is machined to perfectly fit your DeWalt DW733 or DW734 planer (thicknesser).

If you want to get one of the helical heads to upgrade your Dewalt planer, shop now:
https://www.findbuytool.com/products/...
0:00 remove screws
00:46 raise the thickness planer to the highest level
00:59 remove the chain
01:06 take screws off
01:18 get the spring up
01:26 take the whole screw off
01:43 remove the belt
01:48 remove the drive wheel nut
02:42 tap slowly
02:58 use double spiral cuter head to reduce the load on the motor
03:10 put in the cutter head
04:21 tighten the nut
04:28 put the belt on little by little
05:27 adjust and lock the support wheel
05:46 The inserts must be just stuck in place

Other videos that may interest you:
Helical cutter head upgrade on a DeWALT 735 planer
   • Helical cutterhead Install for DeWalt...