Yes, connect Reolink Video Doorbell v1 to existing chimes!

The #reolink video doorbell can not be connected to your existing chime with the connected wires. Not on the Wifi or PoE version.
This is a problem if you want to keep using your existing chimes, electronic or mechanical.

Fortunately, the Reolink doorbell v1 sends a wireless signal to the Reolink wireless chime.

!! Reolink v2 does not work with this receiver since v2 uses 900MHz !!

This wireless signal can be used in combination with a standard 433MHz receiver. This receiver can then activate your existing doorbell chime.

It is easy to do this.

Disconnect the doorbell switch and connect those wires to the wireless receiver. This receiver will act as the doorbell switch.

The wireless receiver needs to be powered by a 12 volt DC power adapter.

Then connect the Reolink doorbell to the supplied power adapter as described in the manual.

Press the learn button on the wireless receiver and
Press the Reolink doorbell button.

The Reolink doorbell is now working with your existing chimes!
see link to the module in the comments below.

Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/andrey-rossi/bring-th...
License code: 8ZNHTIQAKCO5I0GW