How To Make Wooden Climbing Holds - Tools And Steps Explained - Finger Pocket

Wooden holds: check out https://wurft.com/ or @wurfttobias on Instagram. Please SUBSCRIBE to support the channel.

More and more climbers have started making their own climbing holds. In this video, I want to share my process of how I make a wooden two finger pocket.

The following tools were used:
Drill with 20mm Forstner drill bit, 20.5mm 90° countersink drill bit, 11mm drill bit
Band saw
Belt sander (60 or 80 grit)
Veritas Carver's Vise in combination with the 2" mounting plate
Angle grinder with:
carbide discs:
King Arthur's Tools Holey Galahad Round Course
King Arthur's Tools Holey Galahad Flat Medium
Arbortech Turbo Shaft
Arbortech Contour Sander
Drum sander (probably 60 grit)
Drill with a sanding pad (60 or 80 grit)
Drill with 5mm countersink drill bit
Detail sander (60 grit)
Sandpaper (80 grit)

Filmed and edited by Tobias Wurft.

Thanks for all your support!