Shaping Wooden Climbing Holds - Sloper #1

Wooden holds: check out https://wurft.com/ or @wurfttobias on Instagram. Please SUBSCRIBE to support the channel.

In this video, I want to share my process of how I make a wooden sloper for my 42° overhanging board.

The following tools were used:
Band saw
Belt sander (60 grit)
Drill with 20mm Forstner drill bit, 20.5mm 90° countersink drill bit, 11mm drill bit
Veritas Carver's Vise in combination with the 2" mounting plate
Arbortech Mini Grinder with the Mini Turbo disc
Angle grinder with the following carbide disc:
King Arthur's Tools Holey Galahad Flat Medium
Drill with a sanding pad (60 grit)
Drill with 5mm countersink drill bit
Detail sander (60 grit)
Sandpaper (80 grit)

Filmed and edited by Tobias Wurft.

Thanks for all your support!