How to Replace Gas and Brake Pedal Assembly 07-13 Nissan Rogue

For More Info visit us at: http://1aau.to/h/PQ/

In the video, 1A Auto shows how to replace a broken or worn gas and brake pedal. The video is applicable to the 12 Nissan Rogue.

This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oAz/1AXAA00013
• 10mm Socket http://1aau.to/owo/1AXAA00017
• 13mm Socket http://1aau.to/oAo/1AXAA00015
• 8mm Socket http://1aau.to/owo/1AXAA00017
• T20 Driver http://1aau.to/ofu/1AXAA00008
• Ratchet http://1aau.to/oCK/1AXAA00016
• Socket Extensions http://1aau.to/oAo/1AXAA00015
• Swivel

Subscribe:    / @1aauto  

Check out our playlist:
Nissan Rogue 2007-2013 1st Gen:    • Nissan Rogue 2008-2013 1st Gen  

For More Info visit us at http://1aau.to/h/PQ/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.