DIY Compost Sifter

Here is a compost sifter that I made today. I viewed another YouTube video by Gunz McGraw for the design, however; I modified it a little bit. I used mesh on both the sifter and the bottom section. You'll also notice that I used two pieces of wood on the bottom in order to hold the the base securely to the wheelbarrow.The measurements of the bottom are 22" x 44" and the measurements of the top slider are 18" x 24". I used 1/2" wire mesh for both the both and the bottom. I used pressure treated wood. The sides are 2x4, the ends are 1x4 and the glide raills are 2x2. I used 2 1/2 galvanized screws to attach the the 2x4 and fencing staples to attach the 1/2 inch mesh to both the top and bottom. I purchased the caster (non-swivel) from Home Depot.