Скачать или смотреть Bingham Projects Take-Down Recurve Bow Build Series - Part 4 - Gluing up the Limbs

This is part 4 of a series on making a Bingham Projects Take-Down Recurve Bow. This video covers the assembly of the air hose, prepping the form, gluing up the limbs and getting them into the heat box.

An additional item I needed to purchase was some furniture paste wax to put on the mold, prior to glue up.

Minwax Paste Finishing Wax - https://amzn.to/3xjsFUB

Part 1 - Overview -    • Bingham Projects Take-Down Recurve Bow Bui...  
Part 2 - Building the Form -    • Bingham Projects Take-Down Recurve Bow Bui...  
Part 3 - Building the Heat Box -    • Bingham Projects Take-Down Recurve Bow Bui...  
Part 4 - Gluing up the Limbs -    • Bingham Projects Take-Down Recurve Bow Bui...  
Part 5 - Limb Clean Up and Riser Prep -    • Bingham Projects Take-Down Recurve Bow Bui...  
Part 6 - Hardware Install and Limb Tillering -    • Bingham Projects Take-Down Recurve Bow Bui...  
Part 7 - Limb Tip Overlays -    • Bingham Projects Take-Down Recurve Bow Bui...  
Part 8 - Shaping the Riser -    • Bingham Projects Take-Down Recurve Bow Bui...  
Part 9 - Finishing the Bow -    • Bingham Projects Take-Down Recurve Bow Bui...  
Part 10 - Final Thoughts -    • Bingham Projects Take-Down Recurve Bow Bui...  

This video and description may contain affiliate links and as an Amazon Associate I earn from qualifying purchases which means that if you click on one of the products links, I'll receive a small commission.