GOTH-3Designs - Obi-Wan Kenobi Master Chassis - DIY Build Timelapse - Star Wars FX Lightsabers

Here is a new Master Chassis build timelapse video, for ‪@KRSabers‬ Desert Wanderer / Obi-Wan Kenobi's Lightsaber.

This new Master Chassis is already available for DIY and all details are here: https://goth-3designs.com/instruction...

Chapter 1 - Parts Preparation and Chassis Pre-Assembly
00:00:00 - Step 1 - Cut apart the plastic and metal parts
00:01:36 - Step 2 - Test the part fitment
00:02:09 - Step 3 - Cut the rods and tubes
00:05:13 - Step 4 - Parts weathering

CHAPTER 2 - Power Module Build - Part 1
00:07:38 - Step 5 - NPXL accent strips install
00:09:33 - Step 6 - Cover install
00:10:11 - Step 7 - Add and glue the 4mmOD tubes
00:12:26 - Step 8 - Glue the 1.5mmOD rods

CHAPTER 3 - Power Module Build - Part 2
00:13:13 - Step 9 - Negative Battery contacts install
00:14:15 - Step 10 - Kill Switch install
00:15:55 - Step 11 - Positive battery contact install
00:17:41 - Step 12 - Accent strips wiring
00:20:46 - Step 13 - Speaker install

CHAPTER 4 - Crystal Chamber Build
00:22:11 - Step 14 - Glue the CC insert
00:23:26 - Step 15 - Add and glue the 4mmOD tubes
00:24:02 - Step 16 - Nano Pixel wiring
00:24:57 - Step 17 - Wiring management
00:26:25 - Step 18 - Nano Pixel install
00:27:23 - Step 19 - Glue the CC to the Power Module

CHAPTER 5 - Front Module Build Part 1
00:28:08 - Step 20 - Glue the OLED
00:28:55 - Step 21 - Motor Install
00:29:58 - Step 22 - OLED Wiring
00:31:01 - Step 23 - NPXL accent strips install (4 LED strips)
00:32:36 - Step 24 - OLED cover and rods install
00:33:39 - Step 25 - Join and glue the chassis to the main assembly

CHAPTER 6 - Front Module Build Part 2
(not shown) - Step 26 - Start wiring the soundboard
00:34:25 - Step 27 - Install the Aux switch.
00:36:04 - Step 28 - Continue soundboard wiring and tests
00:37:17 - Step 29 - Soundboard accent soldering (unified pads look)
00:38:29 - Step 30 - Glue the soundboard in its slot
00:39:17 - Step 31 - Install the NPXL hilt side connector

CHAPTER 7 - Covers Install
00:41:41 - Step 32 - Insulate the front cover.
00:42:21 - Step 33 - Install the front cover
00:43:28 - Step 34 - Switch PCB Install
00:44:27 - Step 35 - Battery cover magnets
00:45:10 - Step 36 - Battery cover install

CHAPTER 8 - Hilt Install
00:45:36 - Step 37 - Wire the NPXL blade side PCB
00:47:14 - Step 38 - Glue the connector in the hilt grenade section
00:47:53 - Step 39 - Lock the thin neck parts threads
00:48:10 - Step 40 - Wire the 2nd NPXL hilt side PCB
00:49:06 - Step 41 - Glue the connector in the emitter
00:49:32 - Step 42 - Change the control box screws

FINAL CHAPTER
00:50:48 - This chassis is a nearly full metal core, completely removable, which Crystal Chamber design is inspired from Star Wars movies concept arts, and with cover plates that open to reveal what's under the hood:
- ProffieBoard 2
- Removable 18650 Keeppower battery
- Neopixel
- OLED screen

(Video soundtrack - Star Wars The Old Republic)