Nez0's Bad Shoppe @ Strickly Sidewayz: Yokomo YD-2 ZX Limited Edition

This ain't no shelf queen :D I did some full sends after breaking in the brand new tires and I'm going to tell you right now: WORTH IT! The option parts and chassis settings applied to this pre-assembled YD-2 ZX LM by Yokomo's Factory Team driver Sota Goto works perfectly out of the box and is competition ready for sewiously sweaty sendos. I thought the YD-2 ZX Purple was minty, this feels like literally twice the amount of car. The electronics used were borrowed from the YD-2 ZX Purple (listed below) featured here on my channel but will be changed out for something else before more videos are filmed so driving comparisons can be filmed. Very happy with the results. I did notice however during the install of the electronics that the motor mount was installed in the wrong position and the motor could not be mounted in the correct position which caused the pinion gear to be unable to mesh at all with the spur gear on the transmission. The motor mount was off by one position, so anyone that purchased this version check your motor mounts. Otherwise everything else installed smoothly and I need to choose a body now :D Enjoy the video! :D



Equipment Installed:

OMG Polaris DR120 AX3 Purple ESC (Boost Enabled)
OMG EPIC 8.5T Purple Brushless Sensored Motor
OMG Predator NBS-LP-16BF Bad Shoppe Edition Purple Brushless USB Programmable Servo
OMG V3 Purple 3-Channel Drift Gyro
Sanwa RX-462 2.4Ghz Receiver
Sanwa MT-4S 4-Channel 2.4Ghz Radio System
Reve-D 3700Mah 100C 2S LiPo Battery
Yokomo DRC Tires Mounted On RC ART World Pro SSR Professor SPX Type10S 7mm Wheels



YD-2 ZX Limited Setup OOB

FRONT

Camber: -8
Caster: 10
Ride Height: 9mm
Toe: -2 (Toe Out)
Shock Oil: #300
Shock Piston: Big Bore 4 Hole 1.4mm Holes
Shock Spring: Yokomo D-177FA Front Soft
Shock Preload: 6.80mm (Nez0 Setting)



REAR

Camber: -1.5
Ride Height: 10mm
Toe: +1.5 (Toe In)
Shock Oil: #200
Shock Piston: Big Bore 4 Hole 1.4mm Holes
Shock Spring: Yokomo D-179RS Rear Soft
Shock Preload: 5.50mm (Nez0 Setting)