datakom D300 generator controller pdf drawing | diesel generator control panel wiring diagram

D 300 generator wiring pdf explain | how Datakom generator controller working and wiring with Dg
#electrical #D300 #datakom #generator #controller

WEB BASED D-300
The D-300 is a cost effective, modern technology genset controller ready for internet monitoring.

Its main advantages are multifunctionality, support for multiple topologies, harmonic analysis and detailed power measurements. Less Software features are complete with easy firmware upgrade through USB port.

The Windows based PC software allows monitoring and programming through USB, RS-232 and GPRS.
The Rainbow Scada web service allows monitoring and control of an unlimited number of gensets from a single central location.

D300 Controller Features:
Diesel and gas genset support

• 400Hz operation support

• 400 event logs, full snapshot

• All parameters front panel editable

• 3 level configuration password

• 128x64 graphical LCD display

• Downloadable languages

• Waveform display of V & I

• Harmonic analysis of V & I

• 16Amp MCB & GCB outputs

• 8 configurable digital inputs

• 6 configurable digital outputs

• 3 configurable analog inputs

• Both CANBUS-J1939 & MPU

• 3 configurable service alarms

• Multiple automatic exerciser

• Weekly operation schedule

• Dual mutual standby with

equal aging of gensets

• Manual “speed fine adjust” on selected ECUs

• Automatic fuel pump control

• Disable protections feature

• Excess power protection

• Reverse power protection

• Overload IDMT protection

• Load shedding, dummy load

• Multiple load management

• Current unbalance protection

• Voltage unbalance protection

• Fuel filling & fuel theft alarms

• Battery back-up real time clock

• Idle speed control

• Battery charge run enabled

• Combat mode support

• Multiple nominal conditions

• Contactor & MCB drive

• 4 quadrant genset power counters

• Mains power counters

• Fuel filling counter

• Fuel consumption counter

• Modem diagnostics display

• Configurable through USB,

RS-232 and GPRS

• Free configuration program

• Allows SMS controls

• Ready for central monitoring

• Mobile genset support

• Automatic GSM geo-location

• GPS connectivity (RS232)

• Easy USB firmware upgrade

• IP65 rating with optional gasket

Product Brochure

Brochure (français)

User Manual

User Manual (Spanish)

User Manual (Portuguese)
Product Presentation

TECHNICAL SPECIFICATIONS:-
Alternator voltage: 0 to 300 V-AC (Ph-N)
Alternator frequency: 0-600 Hz.
Mains voltage: 0 to 300 V-AC (Ph-N)
Mains frequency: 0-600 Hz.
Topology: 1-2-3 phases, with or without neutral
DC Supply Range: 8.0 to 36.0 V-DC.
V-A-cos Accuracy: 0.5% + 1 digit
kW-kVA-kVAr Accuracy: 1.0% + 1 digit
Current consumption: 500 mA-DC max @ 12V-DC
Current Inputs: from current transformers. ../5A.
Digital inputs: input voltage 0 to 36 V-DC.
Analog input range: 0-5000 ohms.
Mains and genset contactor outputs: 16Amps@250V
DC Outputs: Protected mosfet semiconductor outputs,
rated 1Amp@28V-DC
Cranking dropouts: survives 0V for 100ms.
Magnetic pickup voltage: 0.5 to 50Vpk.
Magnetic pickup frequency: 0 to 20000 Hz.
Charge Alternator Excitation: 2W.
Display Screen: 2.9”, 128x64 pixels
USB Device: USB 2.0 Full speed
RS-232 Port: selectable baud rate (2400-57600baud)
Operating temperature: -20°C to 70°C (-4 to +158 °F)
Storage temperature: -40°C to 80°C (-40 to +176°F)
Maximum humidity: 95% non-condensing.
IP Protection: IP65 from front panel, IP30 from the rear
(with gasket)
Dimensions: 172 x 134 x 46mm (WxHxD)
Panel Cut-out Dimensions: 151 x 111 mm minimum.
Weight: 300 g (approx.)
Case Material: High Temperature, non-flammable
ABS/PC
Installation: Flat surface mounting on a Type 1 enclosure.
Rear retaining plastic brackets.

Parameter Setup and Monitoring Software: Rainbow Plus
DATAKOM ELECTRONICS ENGINEERING A.SSerifali Mahallesi, Bayraktar Bulvari, Kutup Sokak No:26 34775 Umraniye / Istanbul - TURKEYPhone : +90 - 216 466 84 60 +90 - 216 466 84 61 Fax : +90 - 216 364 65 65©2015 DATAKOM -