Volskwagen Passat B6 Steering Column Lock Actuator Fix DIY 3C0905864

Link for the parts
https://www.ebay.com/itm/115798936793

Common problem with this module 3C0905864 :

-Takes several attempts before car will start
-Clicking noise when key inserted
-No ignition car will not start
-Vehicle immobilized

If you already managed to reset this error by EOBD diagnostics the problem will most likely happen again unless you change the parts supplied in this KIT.

DIY Job.
Anyone with basic knowledge and tools can desolder old and solder new parts. Just be patient and tidy.

If the module if from your car then NO ADAPTATION is required. Just put it back in when you change the parts.

If you have a situation where you don't have ignition at all caused by this module then there is a way to reset it.
You need a VCDS and I can link you the procedure, no problem.

What ever problem you have with this module don't put it back in as it was, because the problem will reoccur unless you change the switches and relay.

Link for the parts

https://vagrepaircenter.com/products/...