How to Replace Upper Ball Joint 2015-2020 Cadillac Escalade

Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ia/1ASBJ00418
New Ball Joint Set from 1AAuto.com http://1aau.to/ia/1ASBS00365

This video shows you how to install new, quality TRQ ball joints on your 2015-2020 Cadillac Escalade. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.

This repair was done on a 2016 Cadillac Escalade Luxury 6.2L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2015 Cadillac Escalade
2016 Cadillac Escalade
2017 Cadillac Escalade
2018 Cadillac Escalade
2019 Cadillac Escalade
2020 Cadillac Escalade

Tools you will need:
• 10mm Socket http://1aau.to/obc7/1AXAA00017
• 18mm Socket
• 21mm Socket
• 22mm Socket http://1aau.to/ooP/1AXAA00266
• Trim Tool Set http://1aau.to/oadn/1AXXX00006
• Pliers
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet http://1aau.to/obc7/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/obw5/1AXAA00015
• Torque Wrench http://1aau.to/oaGA/1AXAA00044
• Gloves http://1aau.to/oaaR/1AXSS00048
• Marker / Writing Utensil
• Safety Glasses
• Floor Jack http://1aau.to/o6H/1AXAA00068
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Cadillac Escalade 2015-2020 4th Generation:    • Cadillac Escalade 2015-2020 4th Gener...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.