Ignition Switch Repair | Nissan Titan, Armada, Infiniti QX-56

Having no crank, no start issue on your first generation Nissan Titan, Armada, or Infiniti QX56? Before replacing the starter or any relays, first check the ignition switch behind the key cylinder. Often, only a little cleaning is all it takes to resolve the problem.

If you do need to replace the ignition switch, this part should be a direct replacement for most first-gen models (AmazonConfirmedFit may say it's not compatible):
https://amzn.to/4bXXpjx (ad)

The only tools needed for repair instead of replacement are a Phillips and slotted screwdriver, a paper towel, a nylon brush or old toothbrush, some dielectric grease (https://amzn.to/4aSR5Zd (ad)), and electrical parts cleaner (https://amzn.to/3Uctvkp (ad)).

0:00 Introduction
0:19 Tools required
0:32 Remove ignition switch
0:48 Open and clean switch
1:19 Apply dielectric grease
1:52 Reinstall and test switch