How to Replace Serpentine Belt Tensioner 2003-2008 Toyota Corolla

Buy Now!
New Accessory Drive Belt Tensioner from 1AAuto.com http://1aau.to/ib/1AEBT00167

This video shows you how to install a new TRQ tensioner pulley in your 2003-2008 Toyota Corolla. The tensioner is a springed device that keeps the serpentine belt in your vehicle at the correct tension to keep it on the pulleys, without being so tight that it breaks. Eventually the tensioner may become worn, loose, or stuck, resulting in belts that squeak, slip, or fall off.

This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla

Tools you will need:
• 12mm Wrench http://1aau.to/oTj/1AXAA00010
• 17mm Wrench http://1aau.to/oTj/1AXAA00010
• 10mm Socket http://1aau.to/oa4k/1AXAA00017
• 12mm Socket http://1aau.to/obmW/1AXAA00015
• 17mm Socket http://1aau.to/obmW/1AXAA00015
• 19mm Socket http://1aau.to/oacE/1AXAA00043
• Ratchet http://1aau.to/obvq/1AXAA00016
• Torque Wrench http://1aau.to/oaze/1AXAA00044

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.