BW Technologies GasAlert Quattro Gas Calibration Guide by Ideal Calibrations

For more information regarding the BW Technologies GasAlert Quattro (including helpful part numbers) please see http://www.idealcalibrations.com/bw-t...

This is a video in the How To Calibrate Your Gas Monitor series by Ideal Calibrations. All you need is trusted calibration gas (of course we recommend Ideal Gases brand), a cal cup, a regulator, and tubing.

If you have a problem during your calibration, give us a call or send it in for repair here:
https://idealcalibrations.com/gas-det...

BW Technologies GasAlert Quattro Gas Calibration Guide by Ideal Calibrations
1. Verify gas blend and expiration date.
2. Press and Hold Power Button wait for screen to come on then release.
3. Press and hold power button, keep holding after it shuts off, it will start in calibration mode

Calibration Gas for the BW GasAlert Quattro is:
25ppm Hydrogen Sulfide
100ppm Carbon Monoxide
50% LEL Methane
18.0% Oxygen
Nitrogen Balance

Buy the calibration gas here:
https://idealcalibrations.com/calibra...

Buy a Regulator:
https://idealcalibrations.com/0-5-lpm...

Buy a replacement Oxygen Sensor here:
https://idealcalibrations.com/oxygen-...

If you get a bad O2 sensor, or the unit won't zero, you have two options:
1. You can either send it in to us and we'll fix it for you (estimate $241 + ship) by going to https://idealcalibrations.com/gas-det... and filling out the form.
2. You can order a generic brand oxygen sensor from us (same type MSA uses in this unit) for $120 + ship by going here: https://idealcalibrations.com/oxygen-...

If you have any gas monitor or calibration gas questions, please feel free to call us at 1-734-956-0539 or to email me at [email protected]. We'd be happy to answer any questions you have.

Please see our websites at:
https://www.idealcalibrations.com