Land Rover Discovery 4: Install APT Rock sliders Step. same as Disco 3, LR3, LR4.

In this video I fit Rock Sliders to the Land Rover. I've been wanting to put some proper Rock Slider steps on the Discovery 4 since we got it last year. So for my birthday I decided to treat myself...

I've been looking around on the internet and saw that a local dealer had the APT Offroad set on their website, not expecting they would have them in-stock I called them on the phone and found they did have them. They has most things actually! It was Friday and I had an early finish so headed to Rova Range to have a look. They had both the 'bar' style with the strengthening underplate AND the ones with the 'step plate' (not shown on website). I thought I would want the step plate infills but when I saw them, decided I preferred the Bar style. I purchased a pair on the spot and headed home to fit them.
I made the video because I do most of the work on this vehicle one my own on the drive. I don't have a massive toolset and generally use what ever tools I have. If i need anything specific I call around to see if any friends have what I need and as a last resort will buy something.

Fitting these on the Discovery 3, 4 (LR3, LR4, L319 ) is identical.

TOOL LIST:
Crosshead screwdriver (short stubby or on a ratchet).
Trim Removal tool(s) Or wide Flathead screwdriver.
Hammer.
Hand Brush to clean off mud and crap.
5mm Allan Key (Hexkey)
Optional drill or driver for 5mm hex bit.
Optional wheel ramps.
Set car to OFFROAD height for easier access.

The process was a little awkward as they are quite heavy and I'd recommend getting and hand when lining up the first few bolts.
I've done a few jobs on the car since we got it including the 2 front air shock absorbers which I did record in detail but have still not got around to editing and putting together on here. I will at somepoint.
I Hope you enjoy the video and it is helpful. As always, if you have any questions or comments please leave them below and i'll get back to you asap.
A LIKE AND SUBSCRIBE is very appreciated! 👍

Get in touch with Rova Range here:
https://www.rovarange.com.au/parts-sh...
Or contact APT Offroad to find a local dealler:
https://aptoffroad.com.au/browse-cata...
APT YouTube channel here too, this guy obviously loves Landys
   / @aptoffroad  

I Hope you enjoy the video and it is helpful. As always, if you have any questions or comments please leave them below and I'll get back to you asap.

You'll also find us on INSTAGRAM @  / camping_begins   where we share our adventures and best deals we find for camping gear.

SHORTS & OUTAKES:    • Outtakes and clips SHORTS  
CARAVAN BEGINS:    • Caravan begins...  
HOW TO:    • HOW TO:  
DEWALT TOOLS:    • Dewalt XR Cordless tools.  
TRAVEL AUSTRALIA:    • Travel  

00:00 Intro
00:49 Tool list
02:39 Remove screws
03:21 Remove trim clips
04:05 Remove trim
04:57 'Punch' in trim clips
05:28 Clean and wipe down
05:55 locate and remove lug tape
08:05 Line up and position bar into place.
08:38 Get bottom bolts in.
10:53 Install side bolts.
12:23 Tighten all bolts Bottom first then side.
13:05 Done! Feel proud.

Filmed on an iPhone 14
Video quality: Having video quality issues? Please check that your device and internet settings can support 4K and that YouTube video quality is set to 4K.

© Camping Begins, 2023. All rights reserved. Any reproduction or republication of all or part of this video/audio is prohibited.

Music supplied by: https://www.chosic.com/free-music/all/
https://freemusicarchive.org/music/Mo...

#camping #lr4 #outdoors #landrover #discovery4 #discovery3 #landroverdiscovery