Fumoto Oil Drain Valve - For Subaru BRZ/FRS/GT86

Fumoto Oil Drain Valve - For Subaru BRZ/FRS/GT86

It is finally time for maintenance. I usually change the oil between 3500~5000 miles. I do recommend changing it more since it is a boosted car now and even more so when running e85. Other than that, quick and easy install of the Fumoto Oil drain valve. This will surely make the oil change in the future a lot easier and significantly faster.

Instagram: @BRZSer

~~~Steps / Check List~~~
- Raise the car to access the oil pan's drain bolt
- Undo the 14mm socket and drain oil
- Remove the oil filter
- Put fresh oil and lightly coat the new oil filter's o-ring
- Install new filter and tighten it enough
- Put a crush washer on the Fumoto Oil drain valve
- Install it in the oil pan and torque it to spec: 28~29 ft/lbs
***Note: Do not use the hex by the drain, you need to use a wrench or a crowfoot wrench to tighten it along with a torque wrench.
- Fill in oil and check the oil level using the oil dipstick
- Enjoy those easy future oil changes!

~~~Parts used in this install~~~

Motul 8100 - ECOlite Oil 5W-30
https://www.amzn.com/B06XC12JKX/

Fumoto Oil Drain Valve - F108S
https://www.amzn.com//B004FFHH0M/

Subaru Brz OEM Oil Filter
https://www.amzn.com/B00ESTFGMQ/

Subaru Brz Oil Drain Crush Washers
https://www.amzn.comB07DN55BTH/

~~~MODS On The 2013 SUBARU BRZ~~~
Engine:
SBD500X v3 Turbo Kit tuned on Visconti OTS @ 91 octanes (250~260 WHP)
Mishimoto Oil Cooler
Radium Dual Oil Catch Can
STI PCV Valve & Check Valve
Fumoto Oil Drain Valve - F108S

Exhaust:
ISR 2.5" Over-pipe
1320 Dual Resonated Front pipe
Ark Grip Catback Exhaust

Transmission:
ACT SB7-XTSS With Streetlight Flywheel
Verus Clutch fork & pivot
Individual Parts Racing (IRP) Short Shifter

Wheels & Tires:
SSR - GTV02 18x9.5 +40
Nitto nt555 G2 245/40/18r

Suspension:
Stock lol

Exterior:
DuckTail - Ikon MotorSports
Anjoshi Bumper Quick Release