How to Replace CV Axle Shaft 2002-2005 Ford Explorer

Buy Now!
New CV Axle Shaft from 1AAuto.com http://1aau.to/id/1AACV00153

This video shows you how to install a CV axle shaft on your 2002-2005 Ford Explorer. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

This process should be similar on the following vehicles:
2002 Ford Explorer
2003 Ford Explorer
2004 Ford Explorer
2005 Ford Explorer

Tools you will need:
• Pocket Screwdriver
• Pry Bar http://1aau.to/ob/1AXAA00020
• 14mm Socket http://1aau.to/oa/1AXAA00015
• 18mm Socket http://1aau.to/ob/1AXAA00043
• 19mm Socket http://1aau.to/ob/1AXAA00043
• 24mm Socket
• 30mm Socket
• Pickle Fork
• Trim Tool Set http://1aau.to/oa/1AXXX00004
• Locking Pliers http://1aau.to/oa/1AXAA00139
• Side Cutters
• 3/8 Inch Air Impact Gun
• Torque Wrench http://1aau.to/ob/1AXAA00044
• Bungee Cord
• Center Punch http://1aau.to/ob/1AXAA00055
• Hammer http://1aau.to/ob/1AXAA00091

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.