How to Replace Air Injection Check Valve 2005-2010 Chevrolet Cobalt

Buy Now!
New Air Injection Check Valve from 1AAuto.com https://trq.video/ib-ACEMX00019

This video shows you how to install an air injection check valve on your 2005-2010 Chevrolet Cobalt.

This repair was done on a 2007 Chevrolet Cobalt LT 2.2L Coupe 2-Door FWD and the process should be similar on the following vehicles:
2005 Chevrolet Cobalt
2006 Chevrolet Cobalt
2007 Chevrolet Cobalt
2008 Chevrolet Cobalt
2009 Chevrolet Cobalt
2010 Chevrolet Cobalt

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oadj-1AXAA00013
• 10mm Socket https://trq.video/o4q-1AXAA00017
• 13mm Socket https://trq.video/oacM-1AXAA00015
• 8mm Socket https://trq.video/o4q-1AXAA00017
• 1/4 Inch Ratchet https://trq.video/o4q-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/oacM-1AXAA00015
• Torque Wrench https://trq.video/oMF-1AXAA00044
• Brake Parts Cleaner
• Safety Glasses
• Pick https://trq.video/oqe-1AXAA00037
• Razor Blade / Gasket Scraper

Subscribe:    / @trq  

Check out our playlist:
Chevy Cobalt 2005-2010 1st Generation:    • Chevy Cobalt 2005-2010 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.