Stationeers: Phase Change Vulcan T1 Experiment Build

This is an experiment for building a T1 Phase Change Device system for cooling on Vulcan. Overall I see it as plausible to be able to build a system early and while I build this on my already established base, I wanted to see if this is something that can be rushed or built within the 2-5 days of Vulcan and without any of the benefits of T2 such as IC10 chips or counterflow exchangers. The goal was to see if something could be made and function to provide a solid temperature control for as little power as possible since early game you can still run into power issues.

End Result: This is something workable, pretty iron hungry with in-line tanks and managed to keep it to roughly 50ish steel or silver. This would require the pipe bender and electronics printer for the chips and since I used a labeler, the tool printer as well to make setup easier.

0:00 Intro
1:25 Getting started Building Phase Change Device
4:00 Coolant Plan and considerations
7:05 Pressure Settings for chambers
9:00 Building the Night Time Pollutant Compressor
9:50 Building the Liquid "Storage"
10:45 Building the Pollutant Evaporation storage
11:40 Build Complete

13:05 building the Logic chip circuit
14:35 Chip circuit built
15:17 Chip settings and fixing cabling fails

16:40-24:40 First Night, rushing to pressurize the system and more

25:00-34:00 Improvements to the system
25:40: WHEEEEEEEEEEEE!
27:00 Talking about the built system and problems seen and potential solutions

34:00 - 42:10 Second Night, deliberating on enclosing
42:10 - 44:50 Moving vents around to enclose the in-line tanks
46:50 Figuring out total power being used (330W)
49:00 Thoughts on the experiment so far

53:55-1:00:40 Third Night, seeing effects of enclosing
1:02:30 Time skip to close to 4th night to see how well the system held up

1:04:50 - End 4th Night, Final results and closing thoughts