Noco genius 5 repair mode works !

The battery stopped working 3 months after the repair.

I should have tried another repair attempt, but I didn't.

Some of you mentioned it’s an AGM battery and that I should have tried the AGM charging mode instead, but since the repair mode is common to both a conventional lead-acid battery and an AGM lead-acid battery I don’t think it would have made a big difference.

LEDs indicators guide:
25% Red LED: The 25% Charge LED will slowly pulse “on” and “off”, when the battery is less than 25% fully charged. When the battery is 25% charged, the red Charge LED will be solid.

50% red LED: will slowly pulse “on” and “off”, when the battery is less than 50% fully charged. When the battery is 50% charged, the red Charge LED will be solid.

75% orange LED: will slowly pulse “on” and “off”, when the battery is less than 75% fully charged. When the battery is 75% charged, the orange Charge LED will be solid.

100% Green LED:
Pulsing Green LED - Bulk charge complete, optimizing battery for extended life.
Solid Green LED - When the battery is 100% charged, the Charge LED will be solid green.

100% Green LED - Maintenance mode:
After the battery is fully charged, the charger will continue monitoring the battery, and provide ongoing maintenance and optimization. The 100% Charge LED will pulse “on” and “off” slowly during these cycles. The charger can be left connected to the battery indefinitely.

Thank you for your comments ;)