How to Replace Valve Cover 2012-2018 Nissan Altima (2.5L)

Buy Now!
New Valve Cover from 1AAuto.com http://1aau.to/ia/1AEVC00096

This video shows you how to install a new valve cover gasket in your 2012-2018 Nissan Altima (2.5L). Under the valve cover, you have camshafts and the valvetrain spinning and flinging oil everywhere. A valve cover has to have a gasket to stop some of that oil from leaking out the seam. When you do see oil around your valve cover, you know it’s time to replace the gasket.

This repair was done on a 2016 Nissan Altima Base 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Nissan Altima
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima

Tools you will need:
• 10mm Wrench http://1aau.to/o62/1AXAA00010
• 10mm Socket http://1aau.to/obvD/1AXAA00017
• 14mm Socket http://1aau.to/obSd/1AXAA00015
• 16mm Socket http://1aau.to/obSd/1AXAA00015
• 18mm Socket http://1aau.to/oavT/1AXAA00043
• Air Compressor
• Trim Tool Set http://1aau.to/oaoH/1AXXX00006
• Needle nose pliers http://1aau.to/oGY/1AXAA00051
• Needle nose pliers http://1aau.to/oGY/1AXAA00052
• Pliers
• Ratchet http://1aau.to/obU3/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/obSd/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oaX8/1AXAA00044
• Block of Wood
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/oJh/1AXSS00035
• Dielectric Grease
• Gasket Adhesive
• Gloves http://1aau.to/oaHw/1AXSS00048
• Paper Towels http://1aau.to/oJh/1AXSS00035
• Safety Glasses
• Sandpaper
• Floor Jack http://1aau.to/oanm/1AXAA00068
• Razor Blade / Gasket Scraper
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.