How to Replace Rear Bumper 2002-2008 Dodge Ram 1500

Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/59/bn/bumpers-and-parts

This video shows you how to install a rear bumper on your 2002-2008 Dodge Ram 1500.

This repair was done on a 2004 Dodge Ram 1500 Laramie 5.7L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2002 Dodge Ram 1500
2003 Dodge Ram 1500
2004 Dodge Ram 1500
2005 Dodge Ram 1500
2006 Dodge Ram 1500
2007 Dodge Ram 1500
2008 Dodge Ram 1500

Tools you will need:
• Phillips Head Screwdriver http://1aau.to/obdr/1AXAA00013
• Pry Bar http://1aau.to/oPu/1AXAA00020
• 15mm Socket http://1aau.to/obiC/1AXAA00015
• Trim Tool Set http://1aau.to/o5k/1AXXX00006
• Needle nose pliers http://1aau.to/oBc/1AXAA00051
• Needle nose pliers http://1aau.to/oBc/1AXAA00052
• T25 Torx Socket
• Gloves http://1aau.to/oQz/1AXSS00048
• Safety Glasses
• Hammer
• Punch

Subscribe:    / @trq  

Check out our playlist:
Dodge Ram 1500 3rd Generation 2002-2008:    • Dodge Ram 1500 3rd Generation 2002-2008  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.