Shocking Transformation: Corvette Brake Disaster Better than New (On the Cheap!)

Like everything else with the Abomination Corvette, the brake system had a nasty surprise for me when I went to bring it back up to spec. So it called for a total rebuild from the ground up. But, we did it on the cheap and it turned out even better than I dared hope! Check it out and let us know what you think!

Here are some links to products and tools I used in this build. Please note that I may receive a small percentage from any purchases made through these links. So thanks in advance for your support!

25 Foot Roll of Copper Nickel Brake Line w/ Fittings: https://amzn.to/3V5ilNF
Tubing Straightener: https://amzn.to/4dXoFzz
Russell Brake Flex Lines: https://amzn.to/3X43Ufi
Brake Caliper Rebuild Kit (Front): https://amzn.to/4c5rcWJ
Brake Caliper Rebuild Kit (Rear): https://amzn.to/3V7r9T5
Brake Bias Adjuster: https://amzn.to/3V3KDrS
Brake Bleeder Screws: https://amzn.to/4e3fDkm
Brake Line Clamps: https://amzn.to/3R8EfyC
Gold Brake Caliper Paint: https://amzn.to/3VpIQhd
Clear Brake Caliper Paint: https://amzn.to/4aOVhbQ
Brake Line Clips: https://amzn.to/4aLBryi
Left Rear Brake Line Block: https://amzn.to/3Rbs3x0
Rivet Nut Tool: https://amzn.to/3X5NcMK


00:00 -- Old Corvette brakes & suspension
02:00 -- Tearing down Corvette brake calipers
07:03 -- Extracting broken bleeder screws
09:58 -- Bead blasting rusty calipers
12:55 -- Painting cast brake calipers
15:39 -- Assembling Corvette brake calipers
22:10 -- Bending and routing brake lines