How to Replace Idler Arm Bracket 1999-2007 Chevy Silverado

Buy Now!
New Idler Arm Bracket Assembly from 1AAuto.com http://1aau.to/id/1ASIA00021

If you have to replace the idler arm in your vehicle, odds are, you’ll need to replace the bracket too. Best to get them both done at the same time! This video shows you how to install a new idler arm bracket in your 1999-2007 Chevy Silverado.

• Check here for more videos on the 1999-2007 Chevy Silverado:    • Chevy Silverado 1999-2006 1st Gen  

This process should be similar on the following vehicles:
1999 Chevrolet Silverado 1500
2000 Chevrolet Silverado 1500
2001 Chevrolet Silverado 1500
2002 Chevrolet Silverado 1500
2003 Chevrolet Silverado 1500
2004 Chevrolet Silverado 1500
2005 Chevrolet Silverado 1500
2006 Chevrolet Silverado 1500

Tools you will need:
• 24mm Wrench
• 15mm Socket http://1aau.to/oa/1AXAA00015
• 21mm Socket http://1aau.to/oa/1AXAA00043
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Gloves http://1aau.to/oa/1AXSS00048
• Safety Glasses http://1aau.to/oa/1AXAA00343
• 8mm Allen Wrench
• Floor Jack http://1aau.to/oa/1AXAA00068
• Hammer http://1aau.to/oa/1AXAA00091
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Chevy Silverado 1999-2007 1st Gen:    • Chevy Silverado 1999-2006 1st Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.