Chapter 8: Airport Traffic Patterns Airplane Flying Handbook (FAA-H-8083-3C) Audiobook

Chapter 8: Airport Traffic Patterns Airplane Flying Handbook (FAA-H-8083-3C) Audiobook New 2021
Search for the physical book on Amazon.com
https://amzn.to/3qBrkYX
(paid link) As an Amazon Associate I earn from qualifying purchases.

00:00:00 Introduction
00:00:27 Airport Traffic Patterns and Operations
00:03:09 Standard Airport Traffic Patterns
00:09:52 Non-Towered Airports
00:11:49 Safety Considerations
00:13:53 Chapter Summary

Chapter Summary.
The volume of traffic at an airport can create a hazardous environment.
Airport traffic patterns are procedures that improve the flow of traffic at an airport and enhance safety when properly executed.
Most reported mid-air collisions occur during the final or short- final approach leg of the airport traffic pattern.

Introduction.
Airport traffic patterns ensure that air traffic moves into and out of an airport safely.
The direction and placement of the pattern, the altitude at which it is to be flown, and the procedures for entering and exiting the pattern may depend on local conditions.
Information regarding the procedures for a specific airport can be found in the Chart Supplements.
General information on airport operations and traffic patterns can also be found in the Aeronautical Information Manual (AIM).
Airport Traffic Patterns and Operations.
Just as roads and streets are essential for operating automobiles, airports or airstrips are essential for operating airplanes.
Since flight begins and ends at an airport or other suitable landing field, pilots need to learn the traffic rules, traffic procedures, and traffic pattern layouts in use at various airports.
When an automobile is driven on congested city streets, it can be brought to a stop to give way to conflicting traffic.
Airplane pilots do not have that option.
Consequently, traffic patterns and traffic control procedures exist to minimize conflicts during takeoffs, departures, arrivals, and landings.
The exact nature of each airport traffic pattern is dependent on the runway in use, wind conditions (which determine the runway in use), obstructions, and other factors.
Airports vary in complexity from small grass or sod strips to major terminals with paved runways and taxiways.
Regardless of the type of airport, a pilot should know and abide by the applicable rules and operating procedures.
In addition to checking the traffic pattern and operating procedures for airports of intended use in the Chart Supplements, pilots should know how to interpret any airport visual markings and signs that may be encountered.
In total, the information provided to the pilot keeps air traffic moving with maximum safety and efficiency.
However, the use of any traffic pattern, service, or procedure does not diminish the pilot’s responsibility to see and avoid other aircraft from ramp-out to ramp-in.
When operating at an airport with an operating control tower, the pilot receives a clearance to approach or depart, as well as pertinent information about the traffic pattern by radio.
The tower operator can instruct pilots to enter the traffic pattern at any point or to make a straight-in approach without flying the usual rectangular pattern.
Many other deviations are possible if the tower operator and the pilot work together in an effort to keep traffic moving smoothly.
Jets or heavy airplanes will frequently fly wider and/or higher patterns than lighter airplanes, and will sometimes make a straight-in approach for landing.
A pilot is not expected to have extensive knowledge of all traffic patterns at all airports, but if the pilot is familiar with the basic rectangular pattern, it is easy to make proper approaches and departures from most airports, regardless of whether or not they have control towers.
However, if there is not a control tower, it is the pilot’s responsibility to determine the direction of the traffic pattern, to comply with appropriate traffic rules, and to display common courtesy toward other pilots operating in the area.
When operating at airports without a control tower, the pilot may not see all traffic.
Therefore, the pilot should develop the habit of continued scanning even when air traffic appears light or nil.
Adherence to the basic rectangular traffic pattern reduces the possibility of conflicts and reduces the probability of a midair collision.
Standard Airport Traffic Patterns.
An airport traffic pattern includes the direction and altitude of the pattern and procedures for entering and leaving the pattern.
Unless the airport displays approved visual markings indicating that turns should be made to the right, the pilot should make all turns in the pattern to the left.
Figure 8-1 shows a standard rectangular traffic pattern.
The traffic pattern altitude is usually 1,000 feet above the elevation of the airport surface.
The use of a common altitude at a given airport is the key factor in minimizing the risk of collisions at airports without operating control towers.