3"HD spotlights from Colight, for £66. Let's try them on the BMW R1250GS👍

To get a 12% Discount, enter code PAHD

More information on the HD series :
https://bit.ly/3ZLT3Ew

Colight, the LED lighting company, asked me to review their 3" HD Series, White Combo Beam light for my motorbike.
The lights were sent free of charge, together with a wiring harness and light engine bar mounting bracket(this sadly was too big)

The lights retail at approximately £66 a pair
3300 lumens of lighting power
Combination beam of a flood and spot light all in one unit.

As the BMW is new, I chose these lights, as others in their range may have been more than my limited electrical ability would have coped with.

YOU MAY ALSO WANT TO FIT THESE ON YOUR OFF ROAD/ENDURO BIKE ETC AS THEY ARE COST EFFECTIVE IF YOU DAMAGE THEM👍

Therefore, as I had already fitted a Hex Ezcan accessory manager(power distribution unit) to the BMW, it made perfect sense to see if the lights would integrate and work with this.
To my delight the lights did, although I had to adapt the Colight wiring loom and purchase some extra bits of wiring for connection.

ALL I CAN SAY IS FOR £66 FOR THE LIGHTS I AM VERY IMPRESSED AT THE QUALITY AND PERFORMANCE OF THE COLIGHT UNITS.

00:00 Introduction
00:44 What's in there box
02:50 How are we going to power them?
05:13 Testing them before fitting, do they work
06:52 Mounting the lights onto the engine bars/connecting to power
09:09 Light test in the dark
09:48 Final

Extra bits purchased to complete the install:

Denali light brackets £78
https://denalielectronics.com/product...

x2 female connectors cost £12
https://www.nippynormans.com/spotligh...
x1 y splitter cable cost £13.20
https://ruggedroads.co.uk/MT-3-Pin-Y-...

follow me on instagram   / gsd32i