How to Replace Rear Axle Beam Bushing 2006-2011 Chevrolet HHR

Buy Now!
New Axle Beam Bushing from 1AAuto.com http://1aau.to/ia/1ASMX00532

This video shows you how to install a rear axle beam bushing on your 2006-2011 Chevrolet HHR. The bushings in your beam axle may become worn or broken, resulting in noises or poor suspension performance.

This process should be similar on the following vehicles:
2006 Chevrolet HHR
2007 Chevrolet HHR
2008 Chevrolet HHR
2009 Chevrolet HHR
2010 Chevrolet HHR
2011 Chevrolet HHR

Tools you will need:
• 18mm Wrench
• 15mm Socket http://1aau.to/ob/1AXAA00015
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 21mm Socket http://1aau.to/oa/1AXAA00043
• Ball Joint Press
• 3/8 Inch Air Impact Gun
• Air Chisel http://1aau.to/oa/1AXAA00270
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Drill
• Drill Bit Set http://1aau.to/oa/1AXAA00141
• sanding disc
• Jack Stands http://1aau.to/oa/1AXAA00065
• Reciprocating Saw
• Rubber Mallet http://1aau.to/oa/1AXAA00413

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.