How to Replace Front Lower Ball Joint 1997-2003 Ford F-150

Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ie/1ASBJ00024

This video shows you how to install new, quality TRQ ball joints on your 1997-2003 Ford F-150. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.

This process should be similar on the following vehicles:
1997 Ford F-150
1998 Ford F-150
1999 Ford F-150
2000 Ford F-150
2001 Ford F-150
2002 Ford F-150
2003 Ford F-150

Tools you will need:
• 18mm Socket http://1aau.to/oe/1AXAA00043
• 21mm Socket http://1aau.to/oe/1AXAA00043
• 22mm Socket http://1aau.to/oa/1AXAA00266
• 24mm Socket
• 36mm Socket http://1aau.to/oc/1AAST00006
• Ball Joint Press
• Snap Ring Pliers
• 1/2 Inch Air Impact Gun http://1aau.to/of/1AXAA00252
• 3/8 Inch Air Impact Gun
• Socket Extensions http://1aau.to/oe/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oe/1AXAA00044
• Hammer http://1aau.to/od/1AXAA00091

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.